NEW SATELLITE FINDER DIGITAL SIGNAL METER LNB SATELITE, Electorica

NEW SATELLITE FINDER DIGITAL SIGNAL METER LNB SATELITE

Price :

$6.49

Quantity :

Description

HIGH QUALITY SATELLITE FINDER METER
SUPER FAST SHIPPING
LATEST MODEL

SATELLITE FINDER WITH LOW db
EXTERNAL LIGHT - ABILITY TO CHECK CONTINUITY

This satellite finder works with every satellite system on the market

you can now install your dish by yourself.

100% Brand New!

Input Frequency: 950 ~ 2300 MHz, Works With Every satellite out there
Completely Lighted With Audio Tone
Power: 13-18V supplied by Receiver
Size: 77 x 60 x 28 MM
Instructions Included

Instructions:

SATELLITE FINDER OPERATION:

Unplug the receiver from the wall.
Remove the coax from your LNBF.
Connect the coax to the meter to the connection that says "TO REC".
Using a jumper coax connect to the side of the meter that says "TO LNB".
Connect the other end of the jumper coax to the LNBF.
Plug in and power up your receiver.
Adjust the signal level knob on the front of the meter so the reading is below 5 on the scale.
Do a rough adjustment for the azimuth and elevation of the dish to get a starting point.
With your signal level at or below 5 on the meter, start to adjust the dish very slowly while watching the meter.
Power down the receiver by unplugging the power cord.
Remove the meter and re-connect the coax from the receiver to the LNBF.
You are now ready to power up your receiver.