BEST PRICE GUARANTEED   

SATELLITE FINDER KIT SIGNAL METER LNB SATELITE+COMPASS+ 22K BATT

  • SATELLITE FINDER KIT SIGNAL METER LNB SATELITE+COMPASS+ 22K BATT
  • SATELLITE FINDER KIT SIGNAL METER LNB SATELITE+COMPASS+ 22K BATT
  • SATELLITE FINDER KIT SIGNAL METER LNB SATELITE+COMPASS+ 22K BATT

SATELLITE FINDER KIT SIGNAL METER LNB SATELITE+COMPASS+ 22K BATT

:

$21.99
Quantity :
Description

HIGH QUALITY SATELLITE FINDER METER KIT

 

This  satellite finder works with every satellite system

DISH NETWORK - DIRECTV - BELL EXPRESS VU - FTA - FREE TO AIR - SHAW - ..

you can now install your dish by yourself. 

100% Brand New!

5 YEARS WARRANTY

 

Key Features/Description:

Rotating Bezel           Bi-directional

Climate Capacity       -50 degree to + 65 C degree

Frame Materials        Cast Aluminum

Waterproof                                      Yes

Condition                                        New

Dial Readings          Degree and mils

Casting                   Aluminum/plastic

Damping Process    LIQUID FILLED

  COLOR                   BLACK OR GREEN

Measurement            Ruler markings

 

Input Frequency: 950 ~ 2300 MHz, Works With Every satellite out there
Completely Lighted With Audio Tone
Power: 13-18V supplied by Receiver OR BATTERY
Size: 77 x 60 x 28 MM
Instructions Included      
COMPASS INCLUDED
POWER SUPPLY INCLUDED (BATTERIES NOT INCLUDED)

Instructions:

 

SATELLITE FINDER OPERATION:

 
  1. Unplug the receiver from the wall.
  2. Remove the coax from your LNBF.
  3. Connect the coax to the  meter to the connection that says "TO REC".
  4. Using a jumper coax connect to the side of the meter that says "TO LNB".
  5. Connect the other end of the jumper coax to the LNBF.
  6. Plug in and power up your receiver.
  7. Adjust the signal level knob on the front of the meter so the reading is below 5 on the scale.
  8. Do a rough adjustment for the azimuth and elevation of the dish to get a starting point. (Using the compass)
  9. With your signal level at or below 5 on the meter, start to adjust the dish very slowly while watching the meter. 
  10. Power down the receiver by unplugging the power cord.
  11. Remove the meter and re-connect the coax from the receiver to the LNBF.
  12. You are now ready to power up your receiver.

Kit Includes:

  • SFSatellite Signal strength Meter

  • 6' Connector jumper Cable

  • Lensatic Compass

  • 15V DC battery pack

  • Handy lightweight case

  • Instructions

Reviews

Manufacturers
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
Last visited products
39" FTA SATELLITE DISH SG2100 MOTOR QUAD LNB QPH031 MOTORIZED TV
39" FTA SATELLITE DISH SG2100 MOTOR QUAD LNB QPH031 MOTORIZED TV
BELL EXPRESS VU DISH NETWORK REMOTE IR 2700, 2800 3100 3200 3400
BELL EXPRESS VU DISH NETWORK REMOTE IR 2700, 2800 3100 3200 3400
STAB SATELLITE DISH MOTOR FTA ROTOR HH90 DISEqC ITALIAN MOTORIZE
STAB SATELLITE DISH MOTOR FTA ROTOR HH90 DISEqC ITALIAN MOTORIZE
20" BELL HD DISH 500 SATELLITE & TWIN LNB W/ SWITCH NETWORK SW21
20" BELL HD DISH 500 SATELLITE & TWIN LNB W/ SWITCH NETWORK SW21
24" SATELLITE DISH NETWORK LNB 110 119 118 129 HD 1000 500 FTA I
24" SATELLITE DISH NETWORK LNB 110 119 118 129 HD 1000 500 FTA I
18 QUALITY SATELLITE DISH +DSS LNB NETWORK EXPRESS BEL
18 QUALITY SATELLITE DISH +DSS LNB NETWORK EXPRESS BEL
8-BAY OUTDOOR HDTV UHF DTV ANTENNA + HD TV SPLITTER 8BAY OTA
8-BAY OUTDOOR HDTV UHF DTV ANTENNA + HD TV SPLITTER 8BAY OTA
COMPACT SLIM DIGITAL HD ANTENNA HDTV UHF VHF DTV INDOOR OUTDOOR
COMPACT SLIM DIGITAL HD ANTENNA HDTV UHF VHF DTV INDOOR OUTDOOR