BEST PRICE GUARANTEED   

SATELLITE FINDER KIT SIGNAL METER LNB SATELITE COMPASS POWER SUP

  • SATELLITE FINDER KIT SIGNAL METER LNB SATELITE COMPASS POWER SUP
  • SATELLITE FINDER KIT SIGNAL METER LNB SATELITE COMPASS POWER SUP
  • SATELLITE FINDER KIT SIGNAL METER LNB SATELITE COMPASS POWER SUP
  • SATELLITE FINDER KIT SIGNAL METER LNB SATELITE COMPASS POWER SUP

SATELLITE FINDER KIT SIGNAL METER LNB SATELITE COMPASS POWER SUP

:

$23.99
Quantity :
Description

HIGH QUALITY SATELLITE FINDER METER KIT

 

WITH 22K AND HORIZONTAL AND VERTICAL LIGHTS
  

This  satellite finder works with every satellite system

DISH NETWORK - DIRECTV - BELL EXPRESS VU - FTA - FREE TO AIR - SHAW - ..

you can now install your dish by yourself. 

100% Brand New!

5 YEARS WARRANTY

 

Key Features/Description:

Rotating Bezel           Bi-directional

Climate Capacity       -50 degree to + 65 C degree

Frame Materials        Cast Aluminum

Waterproof                                      Yes

Condition                                        New

Dial Readings          Degree and mils

Casting                   Aluminum/plastic

Damping Process    LIQUID FILLED

  COLOR                   BLACK OR GREEN

Measurement            Ruler markings

 

Input Frequency: 950 ~ 2300 MHz, Works With Every satellite out there
Completely Lighted With Audio Tone
Power: 13-18V supplied by Receiver OR BATTERY
Size: 77 x 60 x 28 MM
Instructions Included      
COMPASS INCLUDED
POWER SUPPLY INCLUDED (BATTERIES NOT INCLUDED)

Instructions:

 

SATELLITE FINDER OPERATION:

 
  1. Unplug the receiver from the wall.
  2. Remove the coax from your LNBF.
  3. Connect the coax to the  meter to the connection that says "TO REC".
  4. Using a jumper coax connect to the side of the meter that says "TO LNB".
  5. Connect the other end of the jumper coax to the LNBF.
  6. Plug in and power up your receiver.
  7. Adjust the signal level knob on the front of the meter so the reading is below 5 on the scale.
  8. Do a rough adjustment for the azimuth and elevation of the dish to get a starting point. (Using the compass)
  9. With your signal level at or below 5 on the meter, start to adjust the dish very slowly while watching the meter. 
  10. Power down the receiver by unplugging the power cord.
  11. Remove the meter and re-connect the coax from the receiver to the LNBF.
  12. You are now ready to power up your receiver.

Kit Includes:

  • SFSatellite Signal strength Meter

  • 6' Connector jumper Cable

  • Lensatic Compass

  • 15V DC battery pack

  • Handy lightweight case

  • Instructions

 

Reviews

Manufacturers
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
Last visited products
3' SATELLITE DISH TRIPOD STAND BELL DIRECTV HD RV CAMP BELL NETW
3' SATELLITE DISH TRIPOD STAND BELL DIRECTV HD RV CAMP BELL NETW
SATELLITE FINDER KIT SIGNAL METER LNB SATELITE+COMPASS+ 22K BATT
SATELLITE FINDER KIT SIGNAL METER LNB SATELITE+COMPASS+ 22K BATT
39" FTA SATELLITE DISH SG2100 MOTOR QUAD LNB QPH031 MOTORIZED TV
39" FTA SATELLITE DISH SG2100 MOTOR QUAD LNB QPH031 MOTORIZED TV
TRIPLE LENSATIC MILITARY STYLE COMPASS CAMPING BOAT ANTENNA OTA
TRIPLE LENSATIC MILITARY STYLE COMPASS CAMPING BOAT ANTENNA OTA
POCKET TONER CABLE TESTER RG6 RG59 COAX SATELLITE DISH COAXIAL T
POCKET TONER CABLE TESTER RG6 RG59 COAX SATELLITE DISH COAXIAL T
ORIGINAL MOTECK SG-2100 SATELLITE DISH MOTOR FTA HH SG2100 ROTOR
ORIGINAL MOTECK SG-2100 SATELLITE DISH MOTOR FTA HH SG2100 ROTOR
DPP SEPARATOR SPLITTER TWIN BELL EXPRESS VU+DISH NETWORK PRO DP
DPP SEPARATOR SPLITTER TWIN BELL EXPRESS VU+DISH NETWORK PRO DP
33" SATELLITE DISH FOR FTA W/ KU BAND LINEAR LNB 97 W
33" SATELLITE DISH FOR FTA W/ KU BAND LINEAR LNB 97 W